10 Industrial Drive
Williamson, WV 25661

Located in the heart of the Appalachian coal fields, Electric Machine & Fab's Williamson, West Virginia facility is a major center for EMF's industrial electric motor, electromechanical, machining, and equipment repair capabilities.

With approximately 86,000 square feet of combined shop space, the Williamson operation is equipped to handle substantial industrial motors, mechanical components, machining projects, and equipment repairs for demanding applications.

The facility serves customers throughout West Virginia, Kentucky, Virginia, Ohio, Pennsylvania, Tennessee, and the greater Appalachian region, while also supporting industrial projects from customers throughout the United States.

This is industrial repair built for serious equipment.

Industrial Capabilities in Williamson, WV

Williamson represents much of the Electric Machine side of Electric Machine & Fab.

The facility combines electrical and mechanical repair capabilities with an industrial machine shop, allowing EMF to address equipment problems that cross traditional trade boundaries.

Core Williamson capabilities include:

• Large industrial electric motor repair and rebuilding
• Electromechanical repair
• Industrial machining
• CNC machining
• Mechanical component repair
• Shaft and journal restoration
• Bearing-fit repair
• Power transmission repair support
• Equipment rebuilding
• Custom replacement parts
• Engineering and reverse engineering support
• Equipment retrofitting and modification

For customers dealing with large industrial motors, rotating equipment, worn mechanical components, or difficult-to-source parts, Williamson provides multiple repair capabilities within one operation.

Industrial Electric Motor Repair in West Virginia

Large industrial electric motor repair is one of the defining capabilities of EMF's Williamson facility.

These aren't the small motors found in light commercial equipment.

EMF works with substantial industrial motors used in mining, manufacturing, processing, utilities, and other heavy industrial applications.

When an industrial motor requires significant repair, the problem may extend beyond the electrical components.

A shaft may be worn.

Bearing fits may require restoration.

Mechanical components may be damaged.

Housings or related components may require attention.

Replacement parts may be difficult to obtain.

Williamson's combination of electric motor repair, electromechanical expertise, and industrial machining allows EMF to approach more of the complete repair under one roof.

Explore Electric Motor Repair & Rebuilding →

Electromechanical Repair

Industrial equipment doesn't always fail in a way that fits neatly into an electrical or mechanical category.

Sometimes it's both.

EMF's Williamson facility provides industrial electromechanical repair for motors, rotating equipment, and related industrial components.

This combination can be particularly valuable when a project requires both mechanical restoration and electrical repair capabilities.

Instead of viewing the motor and its mechanical components as unrelated systems, EMF can evaluate the equipment as a complete industrial assembly.

Explore Electromechanical Repair →

Industrial Machine Shop in Williamson, WV

Williamson is also home to significant industrial machining capabilities.

Our machine-shop resources support standalone machining projects as well as larger motor, electromechanical, and equipment repairs.

Depending on the project, machining capabilities can support:

• Shafts
• Pins
• Bushings
• Sleeves
• Hubs
• Bores
• Journals
• Bearing fits
• Housings
• Mounting components
• Mechanical interfaces
• Custom replacement parts
• Repair components
• Heavy equipment components

This combination of repair machining and custom component manufacturing allows EMF to restore existing parts or manufacture replacements when appropriate.

Explore Industrial Machining & CNC Machining →

CNC Machining for Industrial Components

CNC machining gives EMF another way to support customers requiring custom components and replacement parts.

For industrial applications, machining isn't always about high-volume production.

Sometimes the most important part in the shop is the one component keeping a multimillion-dollar piece of equipment from running.

Williamson can support custom industrial machining for:

• Equipment repair
• Replacement components
• Obsolete parts
• Motor components
• Mechanical assemblies
• Mining equipment
• Manufacturing equipment
• Power transmission components
• Custom machinery

Whether the project begins with a drawing or a damaged component, EMF can help determine a practical manufacturing approach.

Shaft & Mechanical Component Repair

Shafts are critical components throughout industrial motors and mechanically driven equipment.

Years of service can create wear at journals, bearing areas, coupling surfaces, and other mechanical interfaces.

EMF's machining capabilities can support shaft and component restoration as part of larger industrial repairs.

Depending on the condition and application, our team can evaluate:

• Worn shafts
• Damaged journals
• Bearing fits
• Mechanical interfaces
• Coupling areas
• Mounting features
• Related components

If an existing component is no longer practical to repair, our replacement-parts and reverse-engineering capabilities may provide another solution.

Power Transmission Repair Support

Power has to travel from the motor to the equipment doing the work.

That places continuous demands on shafts, couplings, hubs, bearing fits, and related drive components.

Williamson's combination of machining and electromechanical capabilities makes it a natural resource for industrial power transmission component repair.

When older mechanical components become difficult to source, EMF can also evaluate whether they can be repaired or reproduced.

Explore Power Transmission Repair →

Custom Replacement Parts in West Virginia

Industrial equipment can remain productive far longer than the original parts supply.

Eventually, a customer runs into the same frustrating situation:

The machine still works. The part doesn't exist anymore.

Williamson's machining capabilities, combined with EMF's engineering and reverse-engineering resources, can provide another path.

Depending on the project, EMF can work from:

• Existing drawings
• Specifications
• Existing components
• Samples
• Measurements
• Equipment information
• Available technical documentation

Once the component requirements are established, EMF can determine whether it can be repaired, reproduced, or modified.

Explore Parts Manufacturing & Replacement Parts →

Reverse Engineering Obsolete Industrial Components

Sometimes the old component is the best information available.

Original drawings may have disappeared.

The OEM may no longer support the equipment.

A replacement may no longer exist.

Or the machine may have been modified enough that the original part isn't useful anyway.

EMF can use engineering, analysis, and reverse engineering to help establish the requirements for a replacement or modified component.

That information can then move directly into EMF's machining and manufacturing operations.

Explore Engineering, Analysis & Reverse Engineering →

Mining Equipment Support in Williamson

Williamson sits directly within one of America's most important historic coal-producing regions.

Mining has played a major role in shaping EMF's industrial capabilities.

The Williamson facility supports mining customers with services involving:

• Large industrial electric motors
• Electromechanical equipment
• Industrial machining
• Mechanical components
• Shafts
• Power transmission components
• Custom replacement parts
• Equipment repair
• Obsolete components

For mining projects requiring substantial heavy fabrication or major equipment rebuilding, Williamson can also draw on the capabilities of EMF's Sidney, Kentucky facility.

Explore Mining →

Supporting More Than Mining

Mining is a major part of EMF's history and business—but Williamson's capabilities apply across heavy industry.

The facility can support customers in:

• Industrial Manufacturing
• Processing Facilities
• Utilities & Power Generation
• Heavy Construction & Earthmoving
• Municipal & Infrastructure
• Material Handling
• Other Heavy Industrial Operations

Large motors fail in every industry.

Shafts wear in every industry.

Mechanical components become obsolete in every industry.

The equipment changes.

The need for serious repair capabilities doesn't.

Industrial Equipment Retrofitting & Modernization

Older industrial equipment can remain extremely valuable even after individual components become obsolete.

A replacement motor may have different mounting requirements.

A mechanical component may no longer be available.

A custom adapter may be required.

A shaft arrangement may need modification.

EMF can combine engineering, machining, electromechanical repair, and fabrication resources to support equipment retrofit and modernization projects.

The objective is to keep productive machinery useful when replacing the entire machine isn't the preferred solution.

Explore Equipment Retrofitting & Modernization →

86,000 Square Feet of Industrial Capability

The Williamson operation provides approximately 86,000 square feet of combined shop space dedicated to industrial work.

That capacity supports EMF's ability to handle substantial motors, equipment, and components while bringing multiple repair disciplines together within the same facility.

Williamson includes access to:

• Industrial machine-shop resources
• CNC machining capabilities
• Electric motor repair resources
• Electromechanical capabilities
• Diagnostic and testing equipment
• Mechanical repair capabilities
• Equipment rebuilding resources

The result is a facility designed around industrial-scale repair rather than light commercial work.

One Facility Backed by Another

Williamson doesn't operate in isolation.

It is part of a two-facility company.

When a project requires capabilities beyond Williamson's primary specialties, EMF can draw on its larger Sidney, Kentucky operation for:

• Heavy industrial fabrication
• Industrial welding
• Mining equipment rebuilding
• Heavy equipment repair
• Large-format CNC plate cutting
• Heavy steel processing
• Additional machining
• Custom component manufacturing

That gives Williamson customers access to more than the capabilities physically located at 10 Industrial Drive.

They gain access to Electric Machine & Fab as a whole.

Explore Our Sidney, Kentucky Facility →

Built in West Virginia. Serving Appalachia.

EMF's Williamson facility is strategically located to support industrial customers throughout the Appalachian region.

Our regional footprint includes:

West Virginia • Kentucky • Virginia • Ohio • Tennessee • Pennsylvania

For companies throughout southern West Virginia and the surrounding states, Williamson provides access to a substantial industrial repair and machining operation located directly within the region.

That includes customers throughout mining, manufacturing, processing, utilities, construction, and infrastructure.

Industrial Repair Capabilities Nationwide

Being located in Williamson doesn't limit EMF to West Virginia.

Large industrial motors and equipment can be transported to the facility.

Components can be shipped for repair or evaluation.

Drawings and specifications can be provided for custom machining and replacement-part projects.

Completed components can be shipped throughout the United States.

That makes Williamson a resource for industrial customers requiring specialized motor repair, machining, electromechanical repair, or component manufacturing regardless of where the equipment operates.

Visit Electric Machine & Fab in Williamson, West Virginia

Electric Machine & Fab
10 Industrial Drive
Williamson, WV 25661

The Williamson facility is a cornerstone of EMF's industrial capabilities, bringing together large electric motor repair, electromechanical expertise, machining, equipment repair, and custom component manufacturing in the heart of Appalachia.

And when a project requires massive fabrication, heavy equipment rebuilding, or large-format plate processing, the full capabilities of our Sidney operation are available as part of the same company.

Two facilities. One powerful team.

Bring Us the Tough Jobs.

Large industrial motor?

Worn shaft?

Damaged mechanical component?

Obsolete replacement part?

Mining equipment component?

Industrial machinery nobody wants to tackle?

Bring the problem to Williamson.

Electric Machine & Fab has spent years building the people, equipment, shop space, and industrial capabilities needed to solve difficult repair problems.

Tell us what failed, what you're trying to keep running, or what nobody can seem to replace.

We'll help determine the way forward.

REQUEST A QUOTE